|
Usuarios conectados
Actualmente hay 6028 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
CONTROLS AND FUNCTIONS
Bass Pro has controls and indicators that help simplify sonic integration with almost any vehicle�s unique acoustic properties. These controls are located on the amplifier panel, as shown in Figure 10. Power LED Gain Control Crossover Remote Bass Control Auto Turn-On POWER LED: This indicator will glow red when the BassPro is operating. GAIN CONTROL: Use this control to adjust the relative volume (loudness) of BassPro with the other speakers in the vehicle. CROSSOVER: Use this control to adjust the amount of high-frequency information present in BassPro�s output. A lower value signifies less highfrequency content. AUTO TURN-ON: For speakerlevel connections, used this switch to activate (or deactivate) BassPro�s automatic turn-on circuit. For most speaker-level applications, slide the switch to the AUTO position. If you prefer to use the remote (REM) connection, slide the switch to the OFF position. REMOTE BASS CONTROL: Use this RJ-11 jack to connect the supplied remote bass control. SETTING THE CONTROLS: 1. Make sure the head unit is off and VOLUME control is set to minimum. 2. On BassPro�s amplifier panel, set the CROSSOVER to its maximum frequency of 120Hz, as shown in Figure 10. Note: If using the REMOTE BASS CONTROL, set GAIN to maximum and set the BASS CONTROL to the midpoint. 3. Turn the head unit ON and play a selection of your favorite music track that has substantial bass. 4. Adjust the CROSSOVER control counterclockwise, until you hear only low-frequency information. Example � you should not hear vocals coming from BassPro when seated in the normal listening position. 5. Adjust the BASS CONTROL either clockwise or counterclockwise to suit your taste, and to avoid audible distortion. 6. If you elect to not install the Remote Bass Control, adjust the GAIN control to the maximum level that provides undistorted output from the BassPro, with the head unit�s volume control at its 3 o�clock setting. Note: In most cases the above steps will provide you with satisfactory results. However, the actual process may require several readjustments of each control, since the settings will interact with one another. If necessary, consult your authorized JBL car audio dealer for help in tuning your system.
Figure 10.
6
|
|
|
> |
|